Susceptibility of fluorotic enamel to dental erosion-abrasion

Abstract Dental hard tissue conditions can be of pre- or post-eruptive nature, such as enamel fluorosis and erosive tooth wear (ETW), respectively. Dental enamel fluorosis is caused by the chronic and excessive intake of fluoride during enamel development, leading to increased fluoride concentration and increased porosity. ETW has become a common clinical condition and often impairs dental function and aesthetics. This in vitro study tested the hypothesis that fluorotic enamel presents different susceptibility to dental erosion-abrasion. It consisted of a 3×3×2 factorial design, considering a) fluorosis severity: sound (TF0), mild (TF1-2), moderate (TF3-4); b) abrasive challenge: low, medium, and high; and c) erosive challenge: yes or no. A total of 144 human teeth were selected according to the three fluorosis severity levels (n=48), and subdivided into six groups (n = 8) generated by the association of the different erosive and abrasive challenges. Enamel blocks (4×4 mm) were prepared from each tooth and their natural enamel surfaces subjected to an erosion-abrasion cycling model. After cycling, the depth of the lesions in enamel was assessed by profilometry. ANOVA showed that the three-way and two-way interactions among the factors were not significant (p > 0.20). Enamel fluorosis level (p=0.638) and abrasion level (p = 0.390) had no significant effect on lesion depth. Acid exposure caused significantly more enamel surface loss than water (p < 0.001). Considering the limitations of this in vitro study, fluorosis did not affect the susceptibility of enamel to dental erosion-abrasion.

Effect of different toothpastes on permeability and roughness of eroded dentin / Efeito de diferentes cremes dentais na permeabilidade e rugosidade da dentina erodida

ABSTRACT Dentin hypersensitivity (DH) is characterized by rapid, acute pain arising from exposed dental tubules. Aim: the aim of this study was to evaluate the roughness, tubule occlusion, and permeability of eroded dentin brushed with different toothpastes. Materials and Method: ninety bovine teeth were cut into blocks. Thirty hemifaces were protected with varnish and the other sixty were submitted to permeability tests. Specimens were divided into groups according to the dentifrices: without fluoride (WF), sodium fluoride (NaF), and stannous fluoride (SnF2). The blocks were subjected to a 5-day erosive-abrasive protocol. Surface roughness and dentinal tubule occlusion (n=10) were assessed for both control and test hemifaces of the same sample along with permeability analysis (n=20). Two-way RM ANOVA and Tukey's post-hoc test were performed (p≤0.05). Results: NaF and SnF2 presented higher roughness than WF. The number of open tubules was higher in WF. Permeability was higher in SnF2, but there was no significant difference between WF and NaF. Conclusions: both fluoride toothpastes occluded dentinal tubules and increased roughness. NaF toothpaste promoted greater decrease in dentin permeability.

RESUMO A hipersensibilidade dentinária (HD) é caracterizada por dor rápida e aguda decorrente de túbulos dentais expostos. Objetivo: este estudo teve como objetivo avaliar a rugosidade, oclusão tubular e permeabilidade da dentina erodida escovada com diferentes dentifrícios. Materiais e Método: noventa dentes bovinos foram seccionados em blocos. Trinta hemifaces foram protegidas com verniz e outras sessenta foram submetidas à permeabilidade. Os espécimes foram divididos em grupos de acordo com os dentifrícios: sem flúor (SF), fluoreto de sódio (NaF) e fluoreto estanoso (SnF2). Em seguida, os blocos foram submetidos a um protocolo erosivo-abrasivo de 5 dias. A rugosidade da superfície e a oclusão do túbulo dentinário (n = 10) foram avaliadas para ambas as hemifaces de controle e teste da mesma amostra, também realizou-se a análise de permeabilidade (n = 20). Two-way RM ANOVA e pós-teste de Tukey foram realizados (p≤0,05). Resultados: NaF e SnF2 apresentaram rugosidade superior ao SF. O número de túbulos abertos foi maior em SF. Não encontramos diferenças significativas entre SF e NaF em relação à permeabilidade; entretanto, SnF2 apresentou maior permeabilidade. Conclusão: ambos os dentifrícios fluoretados foram capazes de ocluir os túbulos dentinários e aumentar a rugosidade. No entanto, o dentifrício NaF promoveu uma maior diminuição da permeabilidade dentinária.

Automedicação para clareamento dental: quais são seus riscos / Self dental whitening: what are your risks?

O escurecimento dental pode ser interpretado como um ponto de tensão visual e a busca pelo clareamento dos elementos dentários são baseados na percepção individual e imersa sobre interferências culturais que o indivíduo sofre. A preocupação com a estética do sorriso é histórica, tendo diversos mecanismos que foram usados para branquear os dentes e limpá-los (CONSOLARO, 2013). Atualmente, têm-se um forte apelo pelas mídias levando os indivíduos a buscarem meios para alcançarem o referido padrão estético (RAMOS; MONNERAT; PEREZ, 2014). A classificação dos produtos branqueadores como cosméticos traz prejuízo quanto ao uso irracional e sem supervisão, pois decorre de uma ideia diferente que se tem popularmente que apenas medicamentos podem trazer prejuízos à saúde, assim, seria melhor classificá-los como medicamentos, até porque são capazes de acarretarem mudanças fisiológicas (CONSOLARO, 2013). Diante do exposto, a FDA (Food and Drug Administration) começou a classificá-los como medicamentos ou drogas em 1991 (CONSOLARO A; FRANCISCHONE; CONSOLARO R, 2011). Os agentes branqueadores são à base de peróxido de hidrogênio (H2O2) e são encontrados em dentifrícios, enxaguantes bucais, clareamento dental de consultório e caseiro, e a própria água oxigenada usada para bochecho. Outros meios podem ser vistos na busca pelo clareamento dos dentes: o uso do bicarbonato de sódio, dentifrícios mais abrasivos e produtos com carvão ativado

Comportamiento de las lesiones cervicales no cariosas en pacientes de la clínica estomatológica de Jimaguayú / Behavior of non-carious cervical lesions in patients from the dental clinic of the Jimaguayú municipality

RESUMEN Fundamento: las lesiones cervicales no cariosas son aquellas que se producen por la pérdida de tejido dental debido a causas diferentes de la bacteriana. Las mismas han ganado la atención de investigadores debido a la alta prevalencia con la que se han presentado. Objetivo: describir el comportamiento de las lesiones cervicales no cariosas en pacientes de la clínica estomatológica del municipio Jimaguayú en la provincia Camagüey. Métodos: se realizó un estudio descriptivo observacional analítico y transversal. Se tuvo como población de estudio a 54 pacientes de 20 años y más que presentaron lesiones cervicales no cariosas, se tomaron en consideración variables tales como: sexo, tipo de lesión, factores de riesgo y grupos dentarios afectados. Resultados: las personas mayores de 60 años fueron las más afectadas por este tipo de lesiones. Los hombres prevalecieron con relación a las mujeres, las que a su vez fueron más afectadas por las abfracciones. El factor de riesgo más asociado al origen de estas enfermedades fue la técnica de cepillado incorrecta y se tuvo en cuenta que en un mismo paciente pudieron incidir más de un factor de riesgo. Los premolares fueron los dientes más afectados y en menor medida los incisivos. Conclusiones: se deben considerar a las lesiones cervicales no cariosas como un problema de salud de origen multifactorial y con una clara repercusión sobre la integridad de los tejidos dentarios.

ABSTRACT Background: non-carious cervical lesions are those that are produced by the loss of dental tissue due to causes other than bacterial. They have gained the attention of researchers due to the high prevalence with which they have been presented. Objective: to describe the behavior of non-carious cervical lesions in patients from the dental clinic of the Jimaguayú municipality of Camagüey. Methods: descriptive, observational, analytical and cross-sectional study was carried out with 54 patients of 20 years old and older who presented non-carious cervical lesions as the study population, taking into consideration variables such as sex, type of lesion, risk factors and affected dental groups. Results: people over 60 years of age were the most affected by this type of injury. Men prevailed in relation to women, who in turn were more affected by abfractions. The risk factor most associated with the origin of these pathologies was the incorrect brushing technique and it was taken into account that more than one risk factor could have an impact on the same patient. The premolars were the teeth most affected and to a lesser extent the incisors. Conclusions: non-carious cervical lesions should be considered as a health problem of multifactorial origin and with a clear repercussion on the integrity of the dental tissues.

Avaliação qualitativa de dentes artificiais de resina acrílica após escovação simulada / Qualitative evaluation of artificial acrylic resin teeth after simulated brushing

Introdução: os dentes artificiais de resina acrílica são amplamente utilizados na confecção de próteses, por apresentarem propriedades físicas, mecânicas e biológicas, além de características de fácil manuseio. No entanto, devido sua característica de baixa resistência à abrasão, a escovação pode levar à perda de massa dos dentes artificiais e aumento da rugosidade. Objetivo: avaliar de forma qualitativa a rugosidade superficial e polimento de dentes artificiais das marcas Hereaus Premium; Trilux e Vita, após período de 1 ano de escovação, com fotografias em Lupa Estereoscópica. Metodologia: para a realização deste estudo, serão utilizados 10 dentes artificiais de cada marca comercial (Trilux, Vita e Hereaus Premium). Os dentes serão fixados com resina ortoftálica em tubo de PVC de 15 mm de espessura. Para o teste de abrasão, será usada uma máquina de escovação simulada com escovas de dentes de cerdas macias e solução de pasta de dente. As imagens serão obtidas com câmera digital acoplada a lupa estereoscópica. A rugosidade superficial e o polimento serão analisados antes da escovação simulada e após 12 meses de escovação através das imagens. Resultados: após o teste de abrasão foi observado a presença de um desgaste superficial e/ou ranhuras na superfície dos dentes artificiais em todos os grupos. Porém não houve um padrão similar entre os corpos de prova de um mesmo grupo. Conclusão: Pode-se concluir que a escovação provocou o aumento da rugosidade superficial e alteração no polimento em todos os dentes artificiais utilizados.

Introduction: acrylic resin artificial teeth are widely used in the manufacture of dentures, as they have physical, mechanical and biological properties, in addition to easy handling characteristics. However, due to its characteristic of low abrasion resistance, brushing can lead to loss of mass of artificial teeth and increase in roughness. Objective: qualitatively evaluate the surface roughness and polishing of artificial teeth of Hereaus Premium brands; Trilux and Vita, after a 1-year brushing period, with photographs using a Stereoscopic Magnifying Glass. Methodology: for this study, 10 artificial teeth of each commercial brand will be used (Trilux, Vita and Hereaus Premium). Teeth will be fixed with orthophthalic resin in a 15 mm thick PVC tube. For the abrasion test, a simulated brushing machine with soft bristle toothbrushes and toothpaste solution will be used. Images will be obtained with a digital camera coupled to a stereoscopic magnifying glass. Surface roughness and polishing will be analyzed before simulated brushing and after 12 months of brushing through the images. Results: after the abrasion test, the presence of surface wear and/ or grooves on the surface of the artificial teeth was observed in all groups. However, there was no similar pattern between the specimens of the same group. Conclusion: it can be concluded that brushing caused an increase in surface roughness and change in polishing in all artificial teeth used.

Relationship between extrinsic factors and non-carious cervical lesions in patients of the National Hospital "Hipólito Unánue"

Non-carious cervical lesions cause destructive dental disorders that actively contribute to the progressive loss of dental structure and the immediate need for dental treatment, due to their multiple symptoms and factors that produce them. Aim: The purpose of the study was to determine the relationship between extrinsic factors and non-carious cervical lesions in patients of the National Hospital Hipólito Unánue. Methods: The research was of a descriptive correlative type. The sample consisted of male and female patients between 18 and 65 years old, who attended the carielogy service of this hospital. For data collection, 2 questionnaires were used to estimate the values of the extrinsic factors that allowed us to obtain the necessary information on the variables to be studied. Spearman's Rho was applied to determine the relationship between the variable's study. Results: According to Spearman's Rho of 0.622, compared to p-0.000 <0.01. Between the variables studied; extrinsic factors and noncarious cervical lesions there is a moderate and significant positive correlation. Conclusion: Through this section it was possible to demonstrate the existing relationship between extrinsic variable factors and non-carious cervical lesions, therefore it was concluded that there is a moderate and significant positive correlation in the sample comprised by the patients of the Hospital in mention

Avaliação laboratorial da rugosidade e perda de massa de resinas compostas após a escovação com dentifrício clareador / Laboratory evaluation of roughness and weight loss of composite resins after brushing with whitening dentifrice

Introdução: os dentifrícios clareadores têm sido desenvolvidos para oferecer um melhoramento estético, porém por apresentarem maior abrasividade podem desenvolver efeitos adversos na superfície de materiais restauradores, como um aumento da rugosidade superficial, comprometendo a sobrevida das restaurações. Objetivo: analisar a rugosidade e o comportamento da massa de duas resinas compostas submetidas em laboratório à escovação com água destilada (controle) e com dentifrício abrasivo (DA) ­ Colgate Luminous White®. Metodologia: foram confeccionadas 40 amostras, 20 a partir da Resina fotopolimerizável Opallis Lab® e 20 de blocos para sistema CAD/CAM Brava Block®, divididos em quatro grupos: Opallis Lab® + água destilada, Opallis Lab® + DA, Brava Block® + água destilada, Brava Block® + DA. As amostras foram pesadas e a rugosidade aferida antes e após a escovação. Foi utilizada uma máquina de escovação em 14.690 ciclos para simulação de um ano de escovação. Os dados foram tabulados e analisados quanto à variância (ANOVA) e posteriormente realizados o teste de Tukey, comparando as médias, duas a duas. Resultados: quanto ao DA, a resina fotopolimerizável apresentou comportamento limítrofe comparado ao grupo controle, já o bloco CAD/CAM foi estatisticamente significante. Em ambos, a rugosidade reduziu no grupo controle enquanto que no grupo teste aumentou. A perda de massa apenas, foi estatisticamente significante na resina fotopolimerizável. Quando comparados os tipos de resina, não houve significância estatística quanto à rugosidade e a perda de massa. Conclusão: as resinas apresentam comportamentos semelhantes, mas os dentifrícios abrasivos não são recomendados para escovação de materiais restauradores, pois interferem negativamente na rugosidade

Introduction: whitening dentifrices have been developed to offer an aesthetic improvement, however because of their high abrasiveness, may develop adverse effects on the surface of restorative materials, may develop adverse effects on the surface of restorative materials, such as increased surface roughness, compromising the survival of restorations. Objective: analyze the roughness and mass loss of two laboratory composite resins subjected to brushing with distilled water (control) and with abrasive dentifrice (AD), Colgate Luminous White®. Methodology: were prepared 20 samples, 20 from light-curing resin Opallis Lab® and 20 from blocks for CAD/CAM system (Brava Block®), divided into four groups: Opallis Lab® + distilled water, Opallis Lab® + AD, Brava Block® + distilled water, Brava Block® + AD. The samples were weighed and the roughness measured before and after brushing. A brushing machine was used in 14,690 cycles simulating 1 year of brushing. Data were tabulated and analyzed for variance (ANOVA) and later performed the Tukey test, comparing the means, two to two. Results: as for the AD, the light-curing resin presented borderline behavior compared to the control group, when the CAD/CAM block was statistically significant. In both, the roughness decreased in the control group while in the test group it increased. The weight loss was only statistically significant in the light-cured resin. When comparing the types of resin, there wasn't statistical significance as for roughness and weight loss. Conclusion: the tested resins have similar behaviors, but abrasive dentifrices are not recommended for brushing restorative materials, because they interfere negatively in the roughness.

Análise da eficácia de dentifrícios clareadores e seus efeitos na superfície dental: um estudo in vitro / Analysis of the effectiveness of whitening dentifrices and their effects on the dental surface: an in vitro study

O clareamento dos dentes pode ser realizado de várias maneiras, em consultório, no âmbito caseiro ou com a utilização de produtos OTC (Over-the-Counter). Dentre esses produtos, existem os dentifrícios clareadores que prometem clarear e prevenir o manchamento dentário. Objetivos: (1) Investigar o potencial clareador e abrasivo de diferentes dentifrícios no esmalte; e (2) avaliar o efeito do dentifrício Oral-B 3D White Perfection® (Oral-B) na prevenção do escurecimento. Materiais e Métodos: Amostras de esmalte bovino foram pigmentadas e escovadas por 14 dias com água (controle negativo) ou com diferentes produtos: Colgate Total 12® (controle), Oral-B, Sensodyne Branqueador Extra Fresh® (Sensodyne) ou Colgate Luminous White Advanced® (Colgate). Oral-B foi testado antes e após pigmentação. As amostras foram avaliadas quanto à cor (espectrofotômetro) e rugosidade superficial (rugosímetro). Para cálculo de alteração de cor (ΔDE00) se utilizou o sistema CIEDE2000. Os dados foram analisados com os testes Kruskal-Wallis, SNK e Mann-Whitney (α=5%). Resultados: O controle negativo apresentou a menor ΔE00 (p<0,05) e o grupo tratado com Sensodyne resultou nos maiores valores (p<0,05). Quanto à rugosidade superficial, não houve diferença significativa entre os grupos avaliados. O dentifrício Oral-B demonstrou efeito protetivo ao manchamento, resultando em menor alteração de cor (p=0,002). Conclusão: Somente o dentifrício Sensodyne apresentou potencial clareador maior que o dentifrício convencional. A escovação prévia com Oral-B reduziu o manchamento dental, embora não tenha prevenido este totalmente de acontecer. Não foram observadas alterações significativas na rugosidade dos dentes após aplicação dos tratamentos, quando comparado ao controle.

Tooth whitening can be performed at the dental office, at-home or upon the use of OTC (Over-the-Counter) pro-ducts. Among the latter, there are whitening toothpastes that promise to bleach and to prevent tooth staining. Objectives: (1) To investigate the bleaching and abrasive potential of different whitening dentifrices to enamel; and (2) to evaluate the effect of Oral-B 3D White Perfection®(Oral-B) toothpaste in preventing staining. Materials and Methods: Bovine enamel samples were stained and brushed for 14 days with water (negative control) or with different products: Colgate Total 12® (control), Oral-B, Sensodyne Branqueador Extra Fresh® (Sensodyne), and Colgate Luminous White Advanced® (Colgate). Oral-B was also tested before and after staining. The samples were tested by their color (spectrophotometer) and surface roughness (profilometer). Color change (ΔDE00) was cal-culated using the CIEDE2000 color system. The data were analyzed using Kruskal-Wallis, SNK, and Mann-Whitney tests (α=5%). Results: The negative control showed the lowest ΔE00 (p<0.05), whereas the group treated with Sensodyne resulted in the greatest color change (p<0.05). For surface roughness, there was not any significant difference among the groups. The Oral-B toothpaste showed a protective effect against staining, resulting in the lowest color change (p=0,002). Conclusion: Only Sensodyne toothpaste showed higher whitening potential than the conventional toothpaste. By using Oral-B prior staining reduced significantly the intensity of staining, although without the complete prevention of this event. Significant differences were not observed after treatment concerning roughness in comparison to the control.

A Etiologia da Lesão Cervical não Cariosa: Um Novo Desafio para o Cirurgião-Dentista do Século XXI / The Etiology of Noncarius Cervical Lesions: a New Challenge for the 21ST Century Dentist

O termo Lesões Cervicais Não Cariosas (LCNCs) refere-se à perda de tecido dentário duro na Junção Cemento-Esmalte (JCE), cuja etiologia não está relacionada com o envolvimento bacteriano. A origem e a progressão desses defeitos cervicais são consideradas multifatoriais, sendo atribuídas a três fatores principais, sendo eles: abfração, biocorrosão e abrasão. Tais fatores podem estar combinados e associados a eventos de força excessiva aplicada durante a escovação, juntamente com a abrasividade de dentifrícios, hábitos alimentares e/ou parafuncionais. Essas lesões podem ter morfologias diferentes de acordo com seu fator etiológico principal, podendo se apresentar em forma de cunha, oval ou arredondada. O objetivo deste trabalho foi realizar uma revisão de literatura a fim de apresentar os desafios do Cirurgião-Dentista na descoberta dos diferentes fatores etiológicos das LCNCs. O desafio em questão se dá pelo estudo da combinação desses diversos fatores, bem como a realização de um diagnóstico preciso, fazendo-se necessário o conhecimento adequado da etiologia a fim de prevenir futuras novas lesões, estagnar as existentes e assim, capacitar o Cirurgião-Dentista a realizar um tratamento eficaz e longínquo das LCNCs. No entanto, ainda existem muitas controvérsias na literatura, tornando necessária a elaboração de mais estudos para elucidar a etiologia das LCNCs

The term noncarious cervical lesions (NCCL) refers to the loss of hard tooth tissue at the Cemento-Enamel Junction (CEJ), whose etiology is not related to bacterial involvement. The origin and progression of these cervical defects are considered multifactorial, being attributed to three main factors: abfraction, biocorrosion and abrasion. Such factors may be combined and associated with excessive force events applied during brushing, along with the abrasiveness of dentifrices, eating and/or parafunctional habits. These lesions may have different morphologies according to their main etiological factor, and may be wedge-shaped, oval or rounded. Our aim in this paper was to perform a literature review in order to present the challenges of the dental surgeon in identifying the different etiological factors of NCCL. Such challenge regards the study of the combination of these factors, as well as the achievement of an accurate diagnosis, requiring adequate knowledge of the etiology in order to prevent future lesions, stagnate existing ones, thus enabling the Dental Surgeon to treat NCCL effectively in the long term. However, there are still many controversies in the literature, making it necessary to develop more studies to elucidate the etiology of NCCL

Charcoal-based dentifrices and powders: analyses of product labels, Instagram engagement, and altmetrics

Abstract This study identified charcoal-based dentifrices and abrasive powders sold in Brazil and analyzed their label information. The products were searched in four online shopping platforms. The same products were searched on Instagram and their engagement metrics were investigated. Furthermore, a literature review of international publications assessing charcoal dentifrices and powders was conducted, and altmetrics were collected (Altmetric and PlumX). Thirty-six products were found with prices between $0.4-22 USD. Most frequent words in product description were sodium, stain, whitening, oil, xylitol, and coconut. Only 3 products contained fluoride. Bactericidal, antiviral, antifungal, and anti-inflammatory activities were indicated, in addition to non-scientific claims such as calming teeth or increasing oral immunity. In total, 72% of products had Instagram profiles, which generally showed low engagement rates (81%) and medium audience quality scores (65%). Twenty-two articles were found in the literature, from which 21 were in vitro studies. The single clinical study was sponsored by a charcoal product and had no control group. In total, 23% of studies showed positive results and 55% reported negative results for the charcoal products, which included no whitening ability, increased roughness, surface alterations, and lower demineralization prevention ability. Altmetric scores for the included articles varied from 0 to 55, with 40.9% of studies mentioned online. In conclusion, charcoal-based products are using marketing strategies on Instagram but their current engagement with the public is not high. Consumers are being exposed to charcoal products whose potential risks to health are still unknown.

Resumo Este estudo identificou dentifrícios e pós abrasivos de carvão vendidos no Brasil e analisou suas informações de rótulo. Os produtos foram pesquisados em quatro plataformas de compras online. Os mesmos produtos foram pesquisados no Instagram e métricas de engajamento dos perfis foram investigadas. Além disso, foi realizada uma revisão da literatura buscando publicações internacionais que avaliaram dentifrícios e pós de carvão; dados de altmetria foram coletados (Altmetric e PlumX). Foram encontrados 36 produtos com preços entre US$ 0,4-22. As palavras mais frequentes na descrição dos produtos foram sódio, mancha, clareamento, óleo, xilitol e coco. Apenas 3 produtos continham flúor. Foram indicadas atividades bactericidas, antivirais, antifúngicas e anti-inflamatórias, além de alegações não-científicas como acalmar dentes ou aumentar a imunidade oral. No total, 72% dos produtos tinham perfis no Instagram, que geralmente apresentavam baixas taxas de engajamento (81%) e média qualidade de audiência (65%). Vinte e dois artigos foram encontrados na literatura, dos quais 21 foram estudos in vitro. O único estudo clínico foi patrocinado por um produto de carvão e não tinha grupo controle. No total, 23% dos estudos apresentaram resultados positivos e 55% relataram resultados negativos para os produtos de carvão, que incluíram incapacidade de clareamento, aumento da rugosidade, alterações superficiais e menor capacidade de prevenção da desmineralização do esmalte. A altmetria dos artigos incluídos variou de 0 a 55, com 40,9% dos estudos sendo mencionados online. Em conclusão, os produtos à base de carvão estão usando estratégias de marketing no Instagram, mas seu engajamento atual com o público não é alto. Consumidores estão sendo expostos a produtos de carvão cujos potenciais riscos à saúde ainda são desconhecidos

Is prolonged bleaching more harmful to dental enamel than daily dietary and hygienic oral habits?

Abstract The ultrastructural and mechanical properties of enamel surface were evaluated after prolonged bleaching treatments with 10% carbamide peroxide in the presence or absence of orange juice (erosive challenge) and toothbrushing (abrasive challenge). In total, 145 incisor bovine teeth were used in this study. Twenty-five samples were prepared for the ultrastructural evaluations, and 120 samples were prepared for microhardness and roughness tests. These 120 samples were divided into eight experimental groups (n = 15): G1- artificial saliva; G2- abrasion; G3- erosion; G4- dental bleaching; G5- erosion + abrasion; G6- bleaching + abrasion; G7- bleaching + erosion; and G8- bleaching + erosion + abrasion. All groups were tested at T0 (before treatment), T1 (14 days), T2 (21 days), and T3 (28 days). Two-way analysis of variance for repeated measures and the post hoc Sidak tests (p ≤ 0.05) were used. The roughness evaluation demonstrated an increase in damage for all experimental groups with an increase in the time period. For microhardness, the groups exposed to artificial saliva (AS) and abrasive challenge did not show any differences at any time points, while the other groups showed a decrease in microhardness from T0 to T3. Ultrastructural evaluation showed different surface alterations in response to the treatments. Despite prolonged bleaching periods, the procedure caused lesser enamel surface alterations than exposure to orange juice alone or in combination with brushing.

Reduction in erosive tooth wear using stannous fluoride-containing dentifrices: a meta-analysis

Abstract Dentifrices containing different active agents may be helpful to allow rehardening and to increase the resistance of the eroded surface to further acids or mechanical impacts. This study aimed to compare the effects of conventional (sodium fluoride [NaF]) and stannous fluoride (SnF2)-containing dentifrices on reducing erosive tooth wear (ETW). The PubMed/MEDLINE, Scopus, LILACS, BBO, EMBASE, TRIP electronic databases, and grey literature were searched until January 2021 to retrieve relevant in vitro and in situ studies related to research question. There were no restrictions on publication year or language. Two authors independently selected the studies, extracted the data, and assessed the risk of bias. ETW data were pooled to calculate and compare both dentifrices (overall analysis) and in vitro and in situ studies separately (subgroup analysis). Statistical analyses were performed using RevMan5.3 with a random effects model. Of 820 potentially eligible studies, 101 were selected for full-text analysis, and 8 were included in the systematic review and meta-analysis. There was a significant difference between SnF2-containing dentifrices and NaF dentifrices only for in vitro studies (p=0.04), showing a higher effect of the SnF2-containing dentifrices against the erosion/abrasion (effect size: -6.80 95%CI: -13.42; -0.19). Most in vitro and in situ studies had high and low risk of bias, respectively. In vitro literature suggests that the ETW reduction is greater when using SnF2-containing dentifrices instead NaF-containing dentifrices. However, the evidence level is insufficient for definitive conclusions. Clinical trials are necessary for a better understanding of the effect of these compounds on ETW.

Prevalência de lesões cervicais não cariosas na dentição decídua / Prevalence of non-carious cervical lesions in the primary dentition

Objetivo: Determinar a prevalência de lesões cervicais não cariosas em crianças na dentição decídua e possíveis fatores etiológicos associados. Métodos:Após a aprovação do Comitê de Ética ­ CEP/UESPI (3.289.732), o estudo transversal foi realizado em 360 crianças com idade entre 2 a 6 anos, de escolas públicas e privadas, divididas em dois grupos: G1 (com lesões cervicais) e G2 (sem lesões cervicais). Foi aplicado um questionário aos pais, seguido do exame clínico das crianças. Foram consideradas lesões detectadas pelo tato e visualmente. Foram realizadas avaliações das médias e dos desvios padrão para variáveis quantitativas. Obteve-se porcentagens e frequências, realizando-se análises de associação entre as variáveis qualitativas a partir do qui-quadrado e comparação da idade média a partir do teste t (p < 0,05). Resultados: Somente lesões do tipo abfração foram encontradas na amostra (5%) e os indivíduos de raça branca apresentaram uma maior prevalência em relação aos demais (55,5%). Houve diferença estatisticamente significativa (p < 0,001) e essas lesões foram identificadas somente em escolas privadas. Quanto ao sexo, em G1, houve diferença estatisticamente significativa, (p = 0,01) com maior prevalência no masculino (66,7%). Os dentes mais acometidos em ordem decrescente foram os caninos e incisivos centrais superiores seguidos dos caninos e incisivos centrais inferiores. Conclusão: A prevalência de lesões cervicais não cariosas, do tipo abfração, em crianças de 2 a 6 anos de idade foi de 5%, tendo sido encontradas somente em escolas privadas, com predominância no sexo masculino. Houve associação entre a abfração e o tipo de escova utilizada na escovação dentária, apresentando maior frequência de lesões quando escovas duras eram utilizadas e escovação forte era executada.

Aim:To determine the prevalence of non-carious cervical lesions in children in the primary dentition and possible associated etiological factors. Method: After approval by the Ethics Committee - CEP / UESPI (3,289,732) ­ this cross-sectional study was carried out on 360 children, from 2 to 6 years of age, from public and private schools, divided into two groups: G1 (with cervical lesions) and G2 (without cervical lesions). A questionnaire was applied to the parents, followed by the children's clinical examination. Lesions detected by touch and visually were considered. Evaluations of means and standard deviations were performed for quantitative variables. Percentages and frequencies were obtained, analyzing the association between qualitative variables based on the chi-square test and comparing the average age using the t test (p < 0.05). Results:Only abfraction-type lesions were found in the sample (5%), and white individuals presented a higher prevalence in relation to the others (55.5%). There was a statistically significant difference (p < 0.001), and these lesions were found only in private schools. As for sex, in G1, there was a statistically significant difference (p = 0.01) with a higher prevalence in males (66.7%). The most affected teeth in decreasing order were the canines and upper central incisors, followed by the canines and lower central incisors. Conclusion: The prevalence of non-carious cervical lesions of the abfraction type in children from 2 to 6 years of age was 5%, which was only found in private schools, with a predominance in males. An association was found between the abfraction and the type of brush used in toothbrushing, with a higher frequency of lesions when hard brushes were used and strong brushing was performed.

Rethinking the decision-making process to treat gingival recession associated with non-carious cervical lesions

Abstract The presence of a tooth-surface defect, such as a non-carious cervical lesion (NCCL), associated with sites of gingival recession (GR) defects creates a combined soft tissue/tooth defect (CD) that requires a different treatment plan. This study aimed to critically review the literature regarding the available treatment protocols for CDs and suggest a new decision-making process. NCCLs were classified as Class A-: the cementoenamel junction (CEJ) was visible and the root surface discrepancy was < 0.5 mm (no step); Class A+: CEJ was visible and the root surface discrepancy was > 0.5 mm (with a step); Class B-: unidentifiable CEJ without a step; Class B+: unidentifiable CEJ with a step. NCCLs affecting both root and crown surfaces (Class B) lead to CEJ destruction and consequently eliminate an important landmark used before and after root coverage procedures. The depth of the root surface discrepancy is vital owing to its possible impact on soft tissue adaptation after healing, which, in turn, may influence the treatment options, namely the use of graft and/or composites to compensate for the discrepancy. Clinically, a step with horizontal depth greater than 0.5 mm should be recognized as the minimum threshold value to define this condition. Extremely deep defects tend to assume a V-shaped topography. Therefore, extremely deep V-shaped defects were classified into subclasses A+V, a V-shaped defect, and B+V, a V-shaped defect with loss of CEJ, for management considerations. The treatment options, supported by the literature, and a decision-making process to deal with each condition are presented.

Influence of Er, Cr: YSGG laser on root dentin submitted to erosive and/or abrasive challenges

Abstract This study evaluated how Er,Cr:YSGG laser, associated or not with 5% fluoride varnish, influences the surface roughness and volume loss of bovine root dentin submitted to erosive and/or abrasive wear. One hundred and twenty dentin specimens were divided into the groups: without preventive treatment (WPT), 5% fluoride varnish (FV); Er,Cr:YSGG laser irradiation (L), and varnish combined with laser (FV + L). The specimens (n = 10) were subdivided into: 1 = erosion (E); 2 = abrasion (A); and 3 = erosion followed by abrasion (E + A). The erosive solution used was a soft-drink (pH = 2.42 at 4ºC) applied in 5-min cycles twice a day for 10d. Abrasive wear involved brushing for 60s with an electric brush (1,600-oscillations/s) at a load of 2.0N. Surface roughness and volume loss were evaluated using a laser scanning confocal microscope. Roughness data were submitted to one-way ANOVA and Tukey post-hoc test. For volume loss, the Kruskal-Wallis and Dunn's post-hoc tests were used (α = 5%). The lowest values of roughness were found in the control areas of all subgroups (p > 0.05). In the experimental area, the [(WPT) + (E+A)] subgroup had a significantly higher roughness (5.712 ± 0.163 μm 2 ) than the other subgroups (p < 0.05). The L and (FV + L) groups had statistically similar roughness, regardless of the type of wear. The (FV + L) group had the lowest volume loss, regardless of the type of wear performed: [(FV + L) + (E)] = 7.5%, [(FV + L) + (A) = 7.3%, and [(FV + L) + (E + A)] = 8.1%. The subgroup [(WPT) + (E + A)] had the highest volume loss (52.3%). The proposed treatments were effective in controlling dentin roughness. Laser irradiation can be an effective method to increase root dentin resistance after challenges and limit problems related to non-carious lesions.

Efeitos de diferentes dentifrícios na permeabilidade e rugosidade de dentina erodida / Effect of different toothpastes on permeability and roughness of eroded dentin

O objetivo deste estudo foi avaliar a rugosidade, a obliteração dos túbulos dentinários e a permeabilidade da dentina erodida e escovada com diferentes dentifrícios. Noventa dentes bovinos foram seccionadas em blocos, sendo que em trinta a hemiface foi protegida com verniz ácido resistente e sessenta foram submetidos ao teste de permeabilidade. Os espécimes foram divididos de acordo com os dentifrícios: sem flúor (SF), com fluoreto de sódio (NaF) e com fluoreto de estanho (SnF2). Em seguida, os blocos foram submetidos a um protocolo erosivo-abrasivo por 5 dias. As análises de rugosidade superficial e obliteração dos túbulos dentinários (n=10) foram realizadas nas hemifaces controle e teste do mesmo espécime e a análise da permeabilidade (n=20) foi realizada novamente. Os dados foram submetidos aos testes de ANOVA a dois critérios medidas repetidas e pós teste de Tukey (p≤0,05). Os grupos NaF e SnF2 apresentaram maior rugosidade comparando-se ao SF. O grupo SF apresentou a maior quantidade de túbulos abertos quanto comparado aos demais. Não houve diferença significativa na permeabilidade pós-ciclagem entre os dentifrícios SF e NaF, contudo o dentifrício SnF2 apresentou maior permeabilidade comparando-se aos demais. Ambos os dentifrícios contendo flúor tiveram oclusão efetiva dos túbulos dentinários; contudo, os efeitos da presença de fluoreto de estanho na permeabilidade podem ser neutralizados pela abrasão deste dentifrício(AU)

The aim of this study was to evaluate the roughness, dentin tubule occlusion and permeability of eroded dentin brushed with different toothpastes. Ninety bovine teeth were sectioned in blocks. The hemiface of thirty specimens was protect with acid resistant varnish and sixty were submitted to permeability test. The specimens were divided according to the dentifrices: without fluoride (WF), sodium fluoride (NaF) and stannous fluoride (SnF2). Then, the blocks were submitted to erosive-abrasive protocol for 5 days. The analysis of surface roughness and dentin tubule occlusion (n=10) were performed on control and test hemifaces of the same sample and permeability analysis (n=20) was again performed. Data were analyzed by two-way RM ANOVA and Tukey tests (p≤0.05). NaF and SnF2 groups presented higher roughness when compared with WF. WF group presented larger number of opened tubules compared to the others. No significant differences were found between WF and NaF for permeability; however, SnF2 presented higher hydraulic conductance compared to other dentifrices. In conclusion, both fluoride-containing toothpastes had promising tubule occlusion; however, the effects on permeability of stannous formulation may be counteracted by the effects of abrasion from this dentifrice(AU)

Comparative Effect of Calcium Mesoporous Silica Versus Calcium and/or Fluoride Products on the Reduction of Erosive Tooth Wear and Abrasive Enamel Lesion

Abstract Objective: To evaluate the effect of a calcium nanocompound on the reduction of erosive tooth wear and abrasion. Material and Methods: Bovine enamel specimens (BE), were randomly assigned to the following groups (n = 10): G1 = Calcium mesoporous silica nanoparticles (Ca2+MSNs); G2 = casein phosphopeptide-amorphous calcium phosphate (CPP-ACP, 2% CPP-ACP, GC®); G3 = casein phosphopeptide-amorphous calcium fluoride phosphate (CPP-ACFP, 2% CPP-ACP + 900 ppm F-, GC®); G4 = sodium fluoride NaF (900 ppm F-, positive control); and G5 = distilled and deionized water (negative control). Each product was applied to the exposed area for one minute, three times per day for three consecutive days, and followed by the immersion of the specimens in Sprite Zero™ - a low-pH solution (2.58) for five minutes (Coca-Cola™). After the first and last erosive challenges of the day, the specimens were submitted to abrasion in a toothbrush machine for 15 seconds (200 g/BE). The specimens were analysed using 3D non-contact optical profilometry, with tooth structure loss (TSL) measurements and scanning electron microscopy (SEM). TSL values were analysed by Kruskal-Wallis and Mann-Whitney tests (p<0.05). Results: There were no significant differences between G1 (10.95 µm) and G3 (10.80 µm) treatments for TSL values; however both resulted in significantly reduced TSL values compared with the G5 (16.00 µm) (p<0.05). The G4 (12.26 µm) showed no statistically significant difference when compared to the G5 (16.00 µm). The groups G1 and G3 presented higher surface preservation than the G5. Conclusion: Ca2+MSNs was effective for reducing tooth surface loss caused by erosive tooth wear and abrasion.

Six-month performance of restorations produced with the ethanol-wet-bonding technique: a randomized trial

Abstract This double-blind randomized controlled clinical trial evaluated the effectiveness of dentin pretreatment with 100% ethanol (EWBT - ethanol wet bonding technique) and different adhesive protocols in noncarious cervical lesions (NCCL) after 6 months. Patients presenting at least one NCCL were included. NCCLs (n=148) were randomly assigned to 4 groups: NE (Non-EWBT + three-step etch-and-rinse (Scotchbond Multi Purpose, 3M ESPE [MP]), E (EWBT + MP); EB (EWBT + [Bond - third step of MP]), and EU (EWBT + universal adhesive (Single Bond Universal, 3M ESPE). Conventional acid-etching (Condac 37%, FGM) and nanohybrid resin composite (Z350, 3M ESPE) were used. Trained and calibrated examiners (Kappa = 0.61) evaluated the restorations at baseline (7 days) and 6-month recall using the USPHS modified criteria. Data were subjected to Chi square (α = 0.05). Differences in the success rate were found for the treatments (p = 0.003). EB presented the lowest success rate compared with the other groups (p < 0.02). No significant differences were detected among NE, E, and EU (p > 0.49). The survival rates were 97.23%, 97.30%, 78.95%, and 97.30% for NE, E, EB, and EU, respectively. Regarding postoperative sensitivity, a significant reduction was found for groups E (p = 0.027) and EU (p < 0.01) after 6 months. After 6 months, EWBT associated to the hydrophobic adhesive system had the highest failure rate.

Avaliação através da tomografia por coerência óptica do esmalte dentário após o uso de dentifrícios clareadores / Evaluation through tomography by optical coherence of dental enamel after the use of clearing dentifrices

Resumo Introdução Historicamente, materiais abrasivos, como mármore em pó, corais e cinzas ósseas, eram utilizados para higienização dentária. Com a evolução, tais materiais foram substituídos por dentifrícios aplicados em escovas dentais, com a mesma finalidade. Objetivo Avaliar, através da Tomografia por Coerência Óptica, o desgaste do esmalte dentário, após o uso de diferentes escovas dentais e materiais utilizados na escovação com componentes abrasivos. Material e método Foram confeccionados 50 corpos de prova, distribuídos em 10 grupos (n=5), de acordo com o dentifrício/escova utilizado. Para o grupo A, foi utilizada a escova dental Curaprox® Adulto Ultra Macia, e, para o grupo B, a escova Dental K® - escova adulto macia. Foram utilizados os seguintes materiais para escovação: Curaprox® Black is White; Colgate® Luminous White Instant, Close Up® White Attraction - MenSuperpure; Carvão Ativado; Água Destilada. As imagens foram realizadas antes e depois da ciclagem de escovação e comparadas quanto às alterações de superfície. A perda da estrutura superficial foi avaliada através dos métodos qualitativo e quantitativo. Para análise estatística dos dados obtidos, foram realizadas as medidas estatísticas: média, desvio padrão, mediana e percentis, avaliados inferencialmente através dos testes estatísticos Mann-Whitney, Kruskal-Wallis, com nível de significância de 5%. Resultado Maior índice de perda de estrutura superficial do esmalte nos grupos G2A (16,09) e G2B (11,38) e menor índice de perda estrutural nos grupos G5A (1,07) e G5B (1,20). Conclusão: Através desse estudo, observou-se que os dentifrícios clareadores e o Carvão Ativado são capazes de promover intenso desgaste do esmalte dentário.

Abstract Introduction Historically, abrasive materials such as marble powders, corals and bone ashes were used for dental hygiene. With evolution, these materials were replaced by dentifrices applied on toothbrushes for the same purpose. Objective To evaluate, through Optical Coherence Tomography, the wear of dental enamel after the use of different toothbrushes and materials used in brushing with abrasive components. Material and method 50 specimens were prepared, distributed in 10 groups (n=5) according to the toothpaste used. For group A, the Curaprox® Adult Ultra Macia toothbrush was used and for group B, the soft toothbrush K® - soft adult toothbrush. The following brushing materials were used: Curaprox® Black is White; Colgate® Luminous White Instant, Close Up® White Attraction - MenSuperpure; Activated Charcoal; Distilled Water. The images were performed before and after the brushing cycle and were compared for surface changes. The loss of the surface structure was evaluated through qualitative and quantitative methods. Statistical analysis of the data was performed using the statistical methods Mann-Whitney, Kruskal-Wallis, with significance level of 5%, mean, standard deviation, median and percentiles. Result A higher index of loss of enamel structure was observed in the G2A (16.09) and G2B (11.38) groups and a lower structural loss rate in the specimens corresponding to the groups G5A (1,07) and G5B (1,20). Conclusion Through this study it was observed that the whitening dentifrices and the Activated Charcoal are able to promote an intense wear of the dental enamel.

The effects of different restorative materials on periodontopathogens in combined restorative-periodontal treatment

Abstract Objective The aim of the study was to evaluate the association between subgingival restorations and the target periodontopathogenic bacteria (Pg, Td and Pi) in subgingival biofilm during one year after combined restorative-periodontal treatment. Material and Methods Seventeen systemically healthy subjects, who were positive for the presence of three cervical lesions associated with gingival recessions in three different adjacent teeth, were included in the study. A total of 51 combined defects were treated with connective tissue graft plus a nanofilled composite resin (NCR+CTG), a resin-modified glass ionemer cement (RMGI+CTG) and a fluoride-releasing resin material with pre-reacted glass (PRG), called giomer (Giomer+CTG). Periodontal clinical measurements and subgingival plaque samples were obtained from all combined defects at baseline and at 6 and 12 months after the surgery. The number of bacteria were evaluated by the real-time polymerase chain reaction (qPCR) method. Results No statistically significant difference in the amount of DNA copies of Pg, Td and Pi was observed in any of the groups at any time points (p>0.05). In addition, there was no statistically significant difference in the amount of DNA copies of the bacteria at baseline and at 6 and 12 months postoperatively, regardless of treatment group (p>0.05). Conclusion This study suggests that subgingivally placed NCR, RMGI and giomer restorations can show similar effects on periodontopathogenic bacteria in the treatment of gingival recessions that are associated with noncarious cervical lesions (NCCLs).